 |
Aeromark 1524 W. Commonwealth Ave. Fullerton, CA 92833-2728 Tel (800) 447-9668 Tel (714) 447-8855 Fax (714) 447-9131 aerostamps@aol.com |
 |
 |
ink, ink for self-inking rubber stamps, plastic, glass, metal, ink for special materials, supermarking ink, willmark ink by willard marking devices, www.aerostamp.com
|
Aeromark 1524 W. Commonwealth Ave. Fullerton, CA 92833-2728 Tel (800) 447-9668 Tel (714) 447-8855 Fax (714) 447-9131 aerostamps@aol.com |
|
|
|
|
 |
|
| Inks For Many Purposes We keep in stock a variety of general purpose inks that will meet many of your needs. Specialized ink such as Acid Etching or Epoxy ink or quantities not shown are available on special order. Many inks come in sizes other than those we stock, contact us for further details. We can also cross reference many of the old Willard Marking Devices Willmark inks. Please note that rubber stamped impressions tend to be rougher than printed impressions. Because they are typically done by hand they can be subject to smearing or uneven pressure. If you are looking for high print quality, consider pad or tampo printing or silk screening. Shipping - Many inks contain volatile solvents and cannot be shipped by air. Some will incur hazardous material charges on ground shipments. Please allow extra shipping time when ordering. Reconditioning - Inks dry by absorption into a porous material or by evaporation. If an ink evaporates quickly on your product, it will do the same on your pad. Inks designed to work on nonporous surfaces often dry quickly on the pad and need to be thinned or "reconditioned" before they can continue to be used. If the ink is a pigment type, the ink will crust on the pad making reconditioning a necessity. Most inks have a special recondioner that should be ordered when you buy the ink. |
|||
|
MATERIAL TO BE MARKED |
SIZES |
| Paper and Cardboard |
|
Stamp Pad Ink - This ink is suitable for ordinary stamp pads and both plastic and metal frame self-inkers. Works by absorption into paper. This ink is available in a wide range of colors: Black, Red, Blue, Brown, Burgundy, Forest Green, Green, Hot Pink, Navy Blue, Ocean, Olive Green, Orange, Purple, Scarlet, Teal, Turquoise, and Yellow. |
Sizes Available: 2oz, Quarts |
| Coated and Slick Paper |
|
istamp Pre-Ink Stamps
are the most convenient method of marking some of these surfaces. We
have tried a variety of coated papers with good results. They do take
time to dry, 10 to 20 minutes, and may not work on very high gloss surfaces.
Submit a sample for trial. istamp refill ink can also be used to re-ink Ultimark, X Stamper, Accustamp & Maxlight pre-inked stamps. |
1/2 oz refills |
Price Marking Ink
- Also known as Supermarking Ink, originally developed for use in retail
price marking on a wide variety of product packaging. Marks on many
types of paper labels, plastic, glass & metal surfaces. Price Marking
Ink is reasonably slow drying on the pad which makes it a good choice
for ease of use. May be used in a felt stamp pad with a rubber hand
stamp or in some self-inked stamps that uses a felt pad. Mark may be
removed by some cleaning products or solvents and will fade with prolonged
exposure to sunlight. Price Marking Ink is a dye ink so does not have
the best density.
|
4oz, Pint |
| PLEASE
NOTE: THESE INKS REQUIRE STAMPS TO BE MADE WITH GUM RUBBER DIES. |
|
| Metals and Plastics |
|
| Price Marking Ink
- Also known as Supermarking Ink, originally developed for use
in retail price marking on a wide variety of product packaging. Marks
on many types of paper labels, plastic, glass & metal surfaces. Price
Marking Ink is reasonably slow drying on the pad which makes it a good
choice for ease of use. May be used in a felt stamp pad with a rubber
hand stamp or in some self-inked stamps that uses a felt pad. Mark may
be removed by some cleaning products or solvents and will fade with prolonged
exposure to sunlight. Price Marking Ink is a dye ink so does not have
the best density. (Available in Black, Red, Blue, Green, Purple) |
4oz, Pint |
| #1250 Ink
- Good general purpose ink that meets Mil. & Government Specifications.
Used heavily by the aircraft industry particularly for marking aluminum
parts. It is also very good for marking mylar and chrome coated labels. (Available in Black, White. Other colors on special order) Material Safety Data Sheet - PDF Dye Colors, Black Material Safety Data Sheet - PDF Pigment Colors, White |
2oz, Pint, Quart, Gallon |
| #667 Opaque Ink
- Inexpensive general purpose fast drying ink. Good density. (Available in Black, White. Other colors on special order) |
4oz, Pint |
| #532 Opaque Ink
- Inexpensive general purpose slow drying ink. Good density.
If drying time is not a problem, then this ink is recommended as crusting
and drying on the pad is much less of problem. (Available in Black, White. Other colors on special order) |
4oz |
| #8870 Ink - This fast drying ink with a dense imprint is particularly suitable for marking sheet metal and galvanized steel on production lines via either roller coder or rubber stamp. | 4oz & Gallon |
| #628 Ink
- a fast-drying, vivid ink with excellent adhesion to polyethylene,
and meets government specifications for marking food packaging. (Available
in Black, White. Other colors on special order) Material Safety Data Sheet - PDF |
4oz |
| #620 Ink - is very similar to 628 ink, but its slower drying time means it lays down a fuller imprint similar to that of a pigment ink. (Available in Black, White. Other colors on special order) | 4oz |
| Slink Ink - Highly pigmented ink, medium dry, gives excellent coverage | 2oz |
| Aero A-X Acid Based Ink - This ink provides excellent adhesion to metal parts, painted surfaces, electronic parts, celluloid and other highly glazed non-porous surfaces as the acid solvent etches into the surface and leaves an indelible impression. We stock the black, some other colors are available on special order. Drying time 30-60 seconds. May be applied with a rubber stamp using either a stone or a felt stamp pad. | 4oz |
| PLEASE NOTE: THESE INKS REQUIRE STAMPS TO BE MADE WITH GUM RUBBER DIES. |
|
| Circuit Boards | |
| #432 Solvent Resistant
Ink - Designed specifically for circuit boards. This medium
dry ink is highly resistant to solvents .... It is also non-conducting.
Note: this ink contains an aggressive solvent so should not be used with
plastic stamp pads or stamping equipment with plastic parts. We have metal
and felt pads specifically for this ink. Same
as Willmark No. 22 Medium Dry (10-30 secs), this ink gives excellent adhesion to circuit boards and the longer it is left to dry the more resistant it becomes to solvents such as degreasers, fluorinated/chlorinated hydrocarbons, alcohols, and soap and water. (Black, White, colors on special order) |
4oz, Pints |
| PLEASE NOTE: THESE INKS REQUIRE STAMPS TO BE MADE WITH GUM RUBBER DIES. |
|
| Numbering Machines | |
| Numbering Machine Ink
- Metal wheeled numbering machines take their own oil based pigment ink. (Available in Black, Red, Blue, Green, Purple) |
2oz |
| PLEASE NOTE: THIS INK IS ONLY FOR NUMBERING MACHINES. IT WILL DAMAGE ANY OTHER STAMPS. |
|
| Linen & Clothing |
|
| #532 Opaque Ink - (Available in Black, White. Other colors on special order) | 4oz |
| PLEASE NOTE: THESE INKS REQUIRE STAMPS TO BE MADE WITH GUM RUBBER DIES. |
|
| UV Visible/Body Stamping | |
| Invisible Ink
- This is a water based ink suitable for marking skin or paper. (Available in Yellow/Green. Other colors and pints available on special order) |
2oz |
This page last modified on
March 25, 2010
This site designed and constructed by Aeromark,
Paul O'Neil, Webmaster |
